Wire design
A tapered core is covered by a distal coil that gives flexibility at the tip.
- Diameter 0.014"
- Coil length 20 cm

KepGwire PTCA is a 0.014" coronary guidewire for angioplasty. It crosses the lesion and acts as the rail for balloon catheters and stent delivery systems.
The wire is designed for pushability, steerability, torque and opacity. It is available in 180 cm and 190 cm lengths with a straight or angled tip.
How KepGwire™ — PTCA Guidewire is built and what each part of the system does.
A tapered core is covered by a distal coil that gives flexibility at the tip.
The soft tip steers into the target vessel with a low tip load.
Silicone and hydrophilic coatings lower friction in the vessel and inside the device.
Two lengths and two tip shapes are available.
KepGwire PTCA is intended to facilitate the placement of balloon dilatation catheters and stent systems during percutaneous coronary intervention.
Read the instructions for use supplied with the device for contraindications, warnings, precautions and handling instructions.
Request instructions for use
The PDF preview loads when this tab opens. If your browser cannot display PDFs inline, use Open in new tab or Download PDF.
Coming Soon
| Parameter | Specification |
|---|---|
| Guidewire | |
| Diameter | 0.014" |
| Lengths | 180 cm, 190 cm |
| Tip | Straight or angled |
| Tip load | 0.5 gf |
| Radiopaque length | 3 cm |
| Coil length | 20 cm |
| Coating | Silicone and hydrophilic |
| Supply | |
| Sterility | Supplied sterile |
| Use | Single use only |
| Sterilisation | Ethylene oxide |
| Diameter | Length (cm) | Tip | Ordering code |
|---|---|---|---|
| 0.014" | 180 | Straight | NT/PTCA/GW/14180/ST |
| 0.014" | 180 | Angled | NT/PTCA/GW/14180/A |
| 0.014" | 190 | Straight | NT/PTCA/GW/14190/ST |
| 0.014" | 190 | Angled | NT/PTCA/GW/14190/A |
| Information | KepGwire™ — PTCA Guidewire |
|---|---|
| Product | KepGwire™ — PTCA Guidewire |
| Device type | PTCA Guidewire |
| Category | Guidewires — Coronary guidewires |
| Available configurations | 4 — see the Size Chart tab for ordering codes |
| Technical specifications | See the Specification tab |
| E-catalogue | Available in the View Brochure tab |
| Supply | Sterile and for single use |
To order, quote the product name and the ordering code from the Size Chart.
KepGwire PTCA is intended to facilitate the placement of balloon dilatation catheters and stent systems during percutaneous coronary intervention.
KepGwire™ — PTCA Guidewire is available in 4 configurations (diameter: 0.014"; lengths: 180 cm, 190 cm; radiopaque length: 3 cm). The Size Chart tab lists every size with its ordering code.
KepGwire™ — PTCA Guidewire is supplied sterile and for single use. Read the instructions for use packed with the device before use.
Send an enquiry from this page with the product name and the ordering code from the Size Chart. The Kepler team will respond with availability and pricing.
Connect with Kepler for product, documentation and business enquiries.