Device design
The syringe, pressure gauge and lock-release handle form one hand-held unit.
- Capacity 20 mL
- Clear polycarbonate barrel
- ABS plunger

KepID is an inflation device for angioplasty. It inflates and deflates balloon catheters with precise pressure control and shows the applied pressure on a gauge.
The 20 mL syringe has a threaded plunger for fine adjustment and a quick-release mechanism for rapid deflation. Standard and Premium versions are available, each also supplied as a kit with accessories.
How KepID™ is built and what each part of the system does.
The syringe, pressure gauge and lock-release handle form one hand-held unit.
The angled gauge is easy to read from the working position, and the luminescent dial stays visible in low light.
Rotating the handle increases pressure in small steps. Releasing the lock allows rapid inflation or deflation.
An extension tube with a rotating male Luer connects to the balloon catheter.
KepID is intended to inflate and deflate balloon catheters and to monitor the pressure within the balloon during angioplasty.
Read the instructions for use supplied with the device for contraindications, warnings, precautions and handling instructions.
Request instructions for use
The PDF preview loads when this tab opens. If your browser cannot display PDFs inline, use Open in new tab or Download PDF.
Coming Soon
| Parameter | Specification |
|---|---|
| Device | |
| Capacity | 20 mL |
| Pressure range | 0–30 atm |
| Gauge | Angled analogue, luminescent dial |
| Barrel | Clear polycarbonate |
| Plunger | ABS |
| Extension tube | 33 cm, rotating male Luer |
| Versions | Standard and Premium |
| Kit | |
| Kit contents | Inflation device, torque device, blunt needle, PTCA connector |
| Supply | |
| Sterility | Supplied sterile |
| Use | Single use only |
| Sterilisation | Ethylene oxide |
| Type | Capacity (mL) | Gauge range (atm) | Supplied as kit | Ordering code |
|---|---|---|---|---|
| Premium | 20 | 0–30 | No | NT/ID/015S |
| Premium | 20 | 0–30 | Yes | NT/ID/014S |
| Standard | 20 | 0–30 | No | NT/ID/013S |
| Standard | 20 | 0–30 | Yes | NT/ID/012 |
| Information | KepID™ |
|---|---|
| Product | KepID™ |
| Device type | Inflation Device |
| Category | Interventional Accessories — Inflation & fluid management |
| Available configurations | 4 — see the Size Chart tab for ordering codes |
| Technical specifications | See the Specification tab |
| Brochure | Available in the View Brochure tab |
| Supply | Sterile and for single use |
To order, quote the product name and the ordering code from the Size Chart.
KepID is intended to inflate and deflate balloon catheters and to monitor the pressure within the balloon during angioplasty.
KepID™ is available in 4 configurations (capacity: 20 mL; gauge: Angled analogue, luminescent dial). The Size Chart tab lists every size with its ordering code.
Clear polycarbonate. The Specification tab gives the full list of materials and dimensions.
KepID™ is supplied sterile and for single use. Read the instructions for use packed with the device before use.
Send an enquiry from this page with the product name and the ordering code from the Size Chart. The Kepler team will respond with availability and pricing.
Connect with Kepler for product, documentation and business enquiries.